Product image coming soon

PREFORMED CLAMPS

IHCPF

Brochure ready to generate

Customise your brochure

Choose your local service centre

Its contact details and location map will appear on the final page.

Your details
Construction
Stainless steel band with rounded edges Integrated buckle requires no hammering or crimping Available in boxed quantities as tabulated
Assembly Instructions
Place the Continuous Band Tool IHCB-TOOL in a vice and attach the Preform Adaptor IHCBF-ADP to the nose of the tool. Slip a Preformed Clamp into the tool and grip the tail end of the clamp with the eccentric lever of the main tool.
  • Insert the hose into the clamp and apply tension by turning the handle of the main tool. Hold the thumb on the side of the buckle where the band enters the jaws of the tool to assist in controlling the tension. Maximum tension has been achieved when the band stops moving through the buckle.
  • At this point, roll the hose over until the shear hook engages behind the buckle edge. It will be necessary to reverse the tensioning handle approximately 1/4 to 1/2 turn (depending on hose diameter) as you roll the hose over to avoid band breakage. Judicious release of the handle will prevent loss of band tension during the roll over process.
  • (a) Pull on the cutter lever to cut the band
  • (b) Turn the disc by hand until tight. Use a ratchet spanner on the hex nut and operate it until the band shears
  • The completed Preformed Band assembly requires no hammering or crimping
Material
Stainless Steel
Application
  • Quickly and easily applied
  • Hose clamping
  • Ideal for repetition assembly in workshops