Product image coming soon

INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. Medium Strength Blue IAT43 Nut Lock

PROTECT IAT43

Protect IAT43 is an anaerobic formulation designed to be used on parts in an "As Received" condition, such as those with protective films (oils) etc.
Brochure ready to generate

Customise your brochure

Choose your local service centre

Its contact details and location map will appear on the final page.

Your details
Useful Hint
Where possible, remove thick deposits of grease or dirt, however IAT43 will penetrate the film once it has been tightened
Properties
Use as a conventional medium strength Locker on cleaned parts with strengths up to 12N/mm2 or as a convenient all purpose locker on oily parts with 8-10/mm2 typical strength depending on oil type and film
Compatible Accelerators Primers
Not recommended
Tech Features
Resin: Mod Methacrylate. Colour: Blue Thixotropic. Cure Speed: <15 mins @ 20 degrees C. Viscosity: 2500-5000. Thixotropic Gap Fill: 0.1mm. Flash Point: >85 degrees C. Life: 12 months @ 20 degrees C. Specific Gravity: 1.04
Temperature Range
-53 degrees C to +150 degrees C
Application
Threadlockers. Designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Product is normally hand applied from the bottle. Full cure time 24 hours
Group Notes
Medium Strength Blue IAT43 Nut Lock. IAT43 in 10 ml and 50 ml bottles. Consult Pirtek for MSDS Sheets for all Industrial Assembly Products