Product image coming soon

INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. High Strength / High Temperature

PROTECT IAR62

IAR62 Retainer is rated up to 232 degrees C as the upper operational temperature and is designed for bonding/securing in a high strength manner, all types of cylindrically fitted parts
Brochure ready to generate

Customise your brochure

Choose your local service centre

Its contact details and location map will appear on the final page.

Your details
Useful Hint
Speed cure IAR62 by applying a localised heat with a heat gun or by placing parts in an oven @ 100 degrees C for 30 minutes. Pre-heating of parts also accelerates the fixture and ultimate final cure
Properties
Good gap fill ability. Elevated upper temperature limits. Resistant to 3000 psi shear
Compatible Accelerators Primers
IA471 Activator can be used, but up to 30% strength reduction may be incurred
Cured Performance
Typical Breakaway Strength: 20 N/mm2
Tech Features
Resin: Mod. Dimethacrylate. Colour: Green. Cure Speed With Activator: 10 minutes. Cure Speed Without Activator: 30 minutes. Viscosity: 7000 cps. Gap Fill: 0.4 mm max. Flash Point: >85 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.08
Temperature Range
-55 degrees C to + 232 degrees C
Application
Retaining. Protect IAR62 is used on all types of applications where temperatures exceed the design features of conventional Retainers, above 150 degrees C. It develops high strength at elevated temperatures. Product is normally hand applied from the bottle. Ensure parts are clean, dry and free from oil and grease. Full cure in 24 hours
Group Notes
High Strength / High Temperature. IAR62 in 10 ml and 50 ml bottles. Consult Pirtek for MSDS Sheets for all Industrial Assembly Products