Product image coming soon
INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. Fast Set General Purpose - Clear
PROTECT IAREX5
IAREX5 is a two part component low odour epoxy with an open time of 60 minutes and sets hard but workable. It is a viscous material that is usually supplied in cartridge format and is designed to mix in a ratio of 1-1 by volume using static type mixing nozzles
Brochure ready to generate
- Typical Performance
- ADV60 allows an open time of approximately 60 minutes prior to setting and gives a handling time of 10 hours with full cure @ 20 degrees C in about 72 hours
- Useful Hint
- Cut nozzles and extrude equal amounts and mix for about 30 seconds. Static mix nozzles should be firstly equalised and a little extruded out and discarded as waste to ensure correct balanced mixing. Apply to a prepared surface and press or clamp surfaces together supporting the joint if required. Note the handling time as the product chosen is a slow set variety
- Temp. vs Strength
- Ultimate strength is achieved above 60 degrees C. It drops significantly from 50 degrees to a minimum @ 40 degrees of less than 25% of full strength or less
- Properties
- CURED PROPERTIES Static mix nozzle: opentime 4 mins. Volume 100g mix: 3.5mins Cure to Light Fixture: 15 minutes. Cure to moderate handling @ 50 degrees C strength - 2 hours. Full 24 hour cure - shear: <18M/mm2. Full 24 hour cure - peel: <6N/mm2. Speed Cured @ 60 degrees C to 50% approx strength – 20-25 minutes. Chemical Resistance: Moderate / Good. Impact Resistance: Poor. Heat Resistance: 20 degrees C to +60 degrees C. Water Resistance: Moderate.
- Tech Features
- Resin: Epoxide. Chemical Resistance: Hydrocarbons, ketones, esters, halo-carbons, aqueous salt solutions and dilute acids and bases. Electrical Resistance: 30,000 mega Ohms. Dielectric Strength (Steel): 300 Volts/mil. Shrinkage: <1%. Non-Volatile Content: 100%. Shelf Life: >6 months @ 25 degrees C.
- Application
- REX5 EPOXY. IAREX5 epoxy is an effective adhesive for wood, metals, ceramic, fibreglass and most plastics. Typical applications include repairs and renovation of metal castings, ceramic tiles, vessels or ornaments, wooden, metal or plastic furniture, stone or concrete paving slabs or copings. It is particularly useful for securing household fittings to brick, plaster, wooden or plastic surfaces, laminating melamine surface sheet to wood or block board, modelling and test rig manufacture. Surface should be cleaned free of grease or dirt. Scuffing or sanding the surface prior to cleaning helps to ensure a good bond
- Group Notes
- Fast Set General Purpose - Clear. IAREX5 in 25 ml double syringe. Consult Pirtek for MSDS Sheets for all Industrial Assembly Products
| Item Code |
|---|
| IAREX5-25 |