Product image coming soon

INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. High Strength Gas Pipe Seal - Yellow

PROTECT IAS77

Protect IAS77 is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. IAS77 is not suitable for oxygen systems.
Brochure ready to generate

Customise your brochure

Choose your local service centre

Its contact details and location map will appear on the final page.

Your details
Useful Hint
When cure speed is extended due to low temperatures or inactive surfaces, activator can be used. Best results are found if IAS77 is applied to 2nd or 3rd threadform. Excess can be wiped away, any migration into lines will not solidify and can be flushed away during commissioning.
Properties
Fast cure to fixture usually <15 mins. @ 20 degrees C. Typical Strength: 5 N/mm2. Sizes: 6mm up to 75mm (coarse). Increase of gap size or fit extends the cure time
Compatible Accelerators Primers
IA471 Activator can be used, but up to 30% strength reduction may be incurred
Tech Features
Resin: Dimethacrylate. Colour: Yellow. Cure Speed with Activator: <10 minutes. Cure Speed w/o Activator: <15 mins @ 20 degrees C. Viscosity: >50,000 cps. Gap Fill: 0.05mm to 0.4mm. Flash Point: >100 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.09
Temperature Range
-50 degrees C to +150 degrees C
Application
Sealing & Gasketing. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Product is normally hand applied from the bottle. Ensure parts are clean, dry and free from oil and grease. Full cure 6-12 hours
Group Notes
High Strength Gas Pipe Seal - Yellow. IAS77 in 50 ml tube. Consult Pirtek for MSDS Sheets for all Industrial Assembly Products