TPR7NC / TPR7NCX2 SERIES II

Inner Liner
Smooth, seamless thermoplastic polyester elastomer (TPE)

Outer Cover
Orange, non-perforated, anti-abrasion polyurethane. UV stabilised and resistant to hydrolysis

Reinforcement
Bonded high density polyester fiber

Application
Medium pressure hose for use on general hydraulic systems that may contact high voltage sources. Aerial equipment / Mobile hydraulics / Rescue apparatus and tools

Materials and Specifications
Max. +70 degrees C with air, water, water based fluids and fire resistant fluids

• SAE 100R7 = 4:1
• ANSI A92.2 = 4:1 is required in the case in which a hose failure could cause the platform or load lifting device to move. A safety factor of 3:1 is acceptable in the case in which a hose failure will not cause lifting device to move.

Features
Flexible at low temperatures with excellent bend radius and low elongation. Compact and tough construction with extreme resistance to kinking and abrasion, ideal for narrow conduits. Non-conductive - less than 50µA leakage under 250000 V/m. Also available as twin-line, refer to TPR7NCX2.

Specifications/Performance
Meets or exceeds

• SAE 100R7 (including non-conductive requirements)
• ISO 3949 R7
• ANSI A92.2 for vehicle mounted aerial devices
• MSHA approved flame resistant outer cover
• Hand cutter is recommended for cutting

Temperature Range
-40 degrees C up to +100 degrees C

Safety Factor
4:1

Vacuum Rating
-0.9 Bar (26.5 in.Hg)