INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. High Strength Instant Adhesive PROTECT IACA60

Application
Instant Bonding. For example, Nitrile, Neoprene and natural rubbers can be bonded in 1-2 seconds and all the bonds are stronger than the material itself. Plastics such as ABS, soft PVC, Polyacetal, EPT and EVA all bond in 1-2 seconds and the bonds are stronger than the material being bonded. Metals such as steel, aluminium, copper and brass all bond in under 5 seconds and the bond strengths are superior to other manufacturers low viscosity products.

Useful Hint
Slower cures of up to 12 seconds are found on Polymethyl Methacrylate (PMMA), Bakelite, Polycarbonate and Viton rubber. Polyolefins can be treated with special preparations. Consult Pirtek regarding Product Data Sheet 25 when dealing with these difficult plastics

Properties
Speed: Plastics (most): <2 seconds. Rubbers (most): <4 seconds. Metals: <5 seconds. Strength: Plastics to substrate failure. Rubbers to substrate failure. Metals >30 N/mm2 (Shear 15 N/mm2)

Procedure for Application
For best results, degrease/abrade and make sure the surfaces are clean and free from dirt, dust and contamination such as mould release agents. Apply a thin film or drop to one surface only and bring parts together holding firmly for a few seconds until the parts achieve a handling strength. Remember one drop bonds about 25mm2 and a 25 ml bottle has about 200 drops. 24 hours for full cure.

Compatible Accelerators Primers
Primers such as A021 or Double Strength A113 as accelerators for fillet cure for priming absorbent surfaces (available from Pirtek to order).

Tech Features
Resin: Modified Ethyl CA. Colour: Clear. Cure Speed With Activator: Instant. Cure Speed Without Activator: 1-5 seconds. Viscosity: 20cps. Gap Fill: 0.1 mm. Flash Point: >85 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.06

Notes
Consult Pirtek for MSDS Sheets for all Industrial Assembly Products

Temperature Range
-60 degrees C to + 90 degrees C