INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. High Strength / High Temperature PROTECT IAR62

Application
Retaining. Protect IAR62 is used on all types of applications where temperatures exceed the design features of conventional Retainers, above 150 degrees C. It develops high strength at elevated temperatures.

Useful Hint
Speed cure IAR62 by applying a localised heat with a heat gun or by placing parts in an oven @ 100 degrees C for 30 minutes. Pre-heating of parts also accelerates the fixture and ultimate final cure

Properties
Good gap fill ability. Elevated upper temperature limits. Resistant to 3000 psi shear

Procedure for Application
Product is normally hand applied from the bottle. Ensure parts are clean, dry and free from oil and grease. Full cure in 24 hours

Compatible Accelerators Primers
IA471 Activator can be used, but up to 30% strength reduction may be incurred

Cured Performance
Typical Breakaway Strength: 20 N/mm2

Tech Features
Resin: Mod. Dimethacrylate. Colour: Green. Cure Speed With Activator: 10 minutes. Cure Speed Without Activator: 30 minutes. Viscosity: 7000 cps. Gap Fill: 0.4 mm max. Flash Point: >85 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.08

Notes
Consult Pirtek for MSDS Sheets for all Industrial Assembly Products

Temperature Range
-55 degrees C to + 232 degrees C