INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. Designer Gasket - Purple Paste PROTECT IAS55

Application
Sealing & Gasketing. IAS55 is used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chainsaws, lawn mowers etc. Use IAS55 for dressing gaskets, spacers etc.

Useful Hint
Where gap size is large or where the surface is uneven, apply IA471 Activator to help the product cure through volume. IAS55 can be roller coated, screen printed, traced or pad applied.

Properties
Instant low pressure sealant. Forms any size or shape. Will not shrink or relax. IAS55 is flexible and will not crack

Procedure for Application
Product is normally hand applied from the tube. Ensure parts are clean, dry and free from oil and grease

Compatible Accelerators Primers
IA471 Activator can be used, but up to 20% strength reduction may be incurred

Cured Performance
Full Cure Time: 12 hours Tensile Strength: 8 N/mm2. Static Shear Strength: 12.5 N/mm2

Tech Features
Resin: Modified Urethane Acrylate. Colour: Purple Paste. Cure Speed With Activator: <2 hours. Cure Speed Without Activator: Up to 12 hours. Viscosity: >1,000,000cps. Gap Fill: 0.5mm. Flash Point: >100 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.10

Notes
Consult Pirtek for MSDS Sheets for all Industrial Assembly Products

Temperature Range
-55 degrees C to + 150 degrees C