INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. Medium Strength Blue IAT43 Nut Lock PROTECT IAT43

Protect IAT43 is an anaerobic formulation designed to be used on parts in an "As Received" condition, such as those with protective films (oils) etc.

Product Details

Application
Threadlockers. Designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance.

Useful Hint
Where possible, remove thick deposits of grease or dirt, however IAT43 will penetrate the film once it has been tightened

Properties
Use as a conventional medium strength Locker on cleaned parts with strengths up to 12N/mm2 or as a convenient all purpose locker on oily parts with 8-10/mm2 typical strength depending on oil type and film

Procedure for Application
Product is normally hand applied from the bottle. Full cure time 24 hours

Compatible Accelerators Primers
Not recommended

Tech Features
Resin: Mod Methacrylate. Colour: Blue Thixotropic. Cure Speed: <15 mins @ 20 degrees C. Viscosity: 2500-5000. Thixotropic Gap Fill: 0.1mm. Flash Point: >85 degrees C. Life: 12 months @ 20 degrees C. Specific Gravity: 1.04

Notes
Consult Pirtek for MSDS Sheets for all Industrial Assembly Products

Temperature Range
-53 degrees C to +150 degrees C

Product Table

Item	Notes
IAT43-10	Medium Strength Blue IAT43 Nut Lock. IAT43 in 10 ml and 50 ml bottles.
IAT43-50	Medium Strength Blue IAT43 Nut Lock. IAT43 in 10 ml and 50 ml bottles.